Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

48" x 7.00" x 20,000# UMI / Voss Slitting Line

Ref # 9985-HK

Click on photo to enlarge

YEAR: 1976

Entry Coil Width: 12" - 48"
Coil Weight: 20,000 lbs.
Coil O.D.: 72"
Operational Modes: Tight Line and Drive Assist
Hand of Line: Left to Right
Line Speed: 0 - 1000 FPM, Build Up
300 FPM Constant speed, High Gear
150 FPM Constant speed, Low Gear
50 FPM - Jog/Thread

Consisting of the following:

-Coil Car: UMI
"L" Lift Type
Self-Contained Hydraulics
20,000# Capacity

-Mandrel Type Uncoiler: UMI
S/N: CPR 543
Hydraulic Expansion
4 Segment Mandrel, 49" Face Width
Coil I.D. Range: 16" to 24"
Threading Drive Motor: 10 HP, 300/1800 RPM
Sliding Base
Wichita Water Cooled Brake
Driven Holddown Roll:
Roll: 5" Dia. x 40" Face, Polyurethane Covered
Cylinder: 4" Bore, 17" Stroke

-Peeler/Pinch Roll/Edgeguide: UMI
Hydraulic Extending Peeler
Manual Edge Guides
Driven Pinch Rolls
Hyd. Crop Shear, 0.250" Capacity, w/54" long Blade

-North American Edge Control System: (added 2006)

-Slitter Heads: UMI
S/N SL 541 (Aluminum Distributors Inc)
(2) Removable Heads
Outboard Stand slides over the Slitting Arbors
7" Dia. x 51" Face Arbors w/Jet Nuts
13" Max. Knife Diameter
DC Drive Motor: 10 HP, 1750/2300 RPM, 240 V
AC Jog Motor: 15 HP, 1655 RPM, Reducer w/14.4:1 Ratio
Both Motors thru Delroyd Reducer w/7.5:1 ratio
Wedge Type Pin Locking System (4 Each)

-Scrap Winder: Octagon
Drive Motor: Hyd.
Hydraulic Eject
Oscillate Wind by Hydraulic Cylinder

-Threading Table/Pinch Roll/Passline Rolls Unit: Herr Voss
(2) Rolls: 8" Dia. x 60" Face, Polyurethane Covered
Drive Motor: Hydraulic
(2) Hydraulic Lift Cylinders: 3.25" Bore, 25" Stroke

-Exit Crop Shear: Herr Voss
S/N: 27501-3
60" Capacity
Hydraulic Operation
Exit Threading Table
Overarm Separator: UMI
Air Cylinder: 8" Bore, 16" Stroke

-Recoiler: UMI
S/N: RR537
16" Diameter x 55" Face Drum
Bolt-on Plates for 20" ID
Powered Clamp and Expansion
Hydraulic Pushoff
Recoiler Drive SN: RRMD 538 (Aluminum Distributors Inc.)
Drive Motor: 75 HP, 650/2000 RPM, 240 V
Delroyd Reducer w/25:1 ratio
Drive-All 2 Speed Transmission
Gear Ratio: #1 - 1.125:1
#2 - 2.238:1

-Exit Coil Car: Herr Voss
Coil Weight Max.: 20,000 lbs.
Dimensions: 59" x 54.5" x 17.75" High
6" Bore Hydraulic Lift Cylinder
Power Drive: Hyd. Motor
Overarm Control Bar with plexi plate holddowns for moving
Slit Coils without bands.

-Entry Hydraulic Unit:

-Exit Hydraulic Unit:

-Electrical System DC Drive:
Mfg: Cutler Hammer Solid State
Responder Drive

-Optional New Solid State DC controls, drives, operators station
and new AC panel can be included for an additional $42,500.

-Removed and in Storage: Toledo, OH.

Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.


Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: